Delphin CODER Electronic Bite Alarm Set 3+1

The Delphin CODER is an electronic bite alarm set, in which the ideal ratio of performance and favorable price is combined. Its main advantages are reliability and 100% functionality, which is comparable even to more expensive sets. The signal between the alarms and the receiver can be transmitted up to 140 m in ideal conditions. The entire set is sold in a hard plastic case, which ensures safety during transport.

The alarm is powered by an LR23A type 12V battery, which has a sufficiently long lifespan. It warns of a drained battery with a short beep. Use the 'V' switch to select one of the 5 volume levels, including silent mode. There is also an option to select the desired tone and sensitivity level (in the 1-9cm range), which also has 5 different levels. The CODER bite alarm's undeniable advantage is the possibility to choose from 7 colors for the alarm's LED diode. Everyone can choose their favorite, and if they want a change, they can simply select another color according to the instructions. A drop bite is indicated by a different tone, the bite alarm LED lights up for 15 seconds after each bite. In the lower part, there is a 2.5 mm jack input for connecting a light indicator. During night fishing, the position diode can also be switched on.

The receiver reliably indicates a bite with sound, light, and, if the switch is in the correct position, also with vibration. With the 'V' switch, you can select one of the 5 volume levels, including silent mode, and with the 'T' switch, select the desired tone. The receiver has four colored LEDs that light up continuously for 15 seconds after a bite. It is powered by 1x9V battery. If its lifespan is nearing its end, it is indicated by a continuous short beep. The receiver, like the bite alarms, stores all selected settings in its memory.

The case of this set can accommodate a 3+1 alarm configuration (3 alarms and one receiver).

The average battery life is 100 hours of continuous operation. Deviation from this value may be influenced by the environment or the condition and age of the battery used.

The CODER set can be paired with the Lightcontact lamp.

ATTENTION! On the receiver of the CODER set, it is possible to switch individual LED diodes on and off, as shown in the video 'ON / OFF LED diodes'. The diode is switched off when the receiver is on by pressing and holding the 'P' button for 2 seconds, then briefly pressing it. The diode can be switched on again in the same way. Individual diodes can be switched between each other by pressing and holding the 'P' button for two seconds and then briefly pressing it.

Technical parameters:

Set 3+1 includes:
- 3x Bite Alarms
- 1x Receiver Unit
- 1x Carrying Case
- 1x Receiver Unit belt clip holder

RECEIVER / functions:
- 5 volume levels (V wheel, including silent mode)
- 5 different tones (T wheel)
- Vibration mode (rocker switch – right position)
- 4 colored indicator LED diodes
- Retains settings in memory
- Rocker switch ON/OFF/VIBRATION
- Memory diode - lights up for 15 seconds after the bite
- Indicates low battery (short beep)
- Range test mode
- Range 140m depending on terrain conditions
- Power supply 1x9V battery

BITE ALARM / functions:
- Waterproof - 5 volume levels (V wheel, including silent mode)
- 5 different tones
- 5 sensitivity levels (Sk wheel)
- 7 selectable bite alarm diode colors
- Retains settings in memory
- Drop bite indication with a different tone
- Memory diode – lights up for 15 seconds after the bite
- Indicates low battery (short beep)
- Night mode diode
- Anti-slip section for the rod
- 2.5 mm jack
- Power supply 1x12V (LR23A)